Remove the HDD blower case. When prompted, press to continue installation. Turn OFF the computer and unplug the power cord. The Drive Status column field now shows Hot Spare. To reset a RAID set hard disk drive: To remove the floppy disk drive: Align the screw holes on the inner rail and the chassis top, then secure theinner rail to the chassis top with screws.
|Date Added:||9 August 2012|
|File Size:||27.24 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
To delete a RAID set: Install the nuts on the holes of the1U space on the rack front and thecorresponding rack rear.
TSE5/PA4 | Server & Workstation | ASUS
Drive in the thumb screw to securethe HDD blower case. The View Array screen appears. For demonstration purposes, all the photos in this section are taken out of therack cabinet.
Tts300-e5 prompted, use the arrow keys to select Yes from the dialog box tocheck the drive. Reboot the system from the hard disk drive. Restore DefaultsThis option allows you to discard the selections you made and restore the systemdefaults. Select an item then press to display the sub-menu. When the failed disk is replaced, the utility assignsthe replacement as the new hot spare. Enable this option only when you install bitoperating system.
Followthe next steps to create a RAID driver disk. Press to select the port ofdestination disk for rebuilding or press to exitThe size of destination disk for rebuilding should be asu same or bigger as theoriginal hard disk. Tips and information to aid in completing a task. Theconfigurable array appears on screen.
To verify the RAID controller driver installation: When finished setting the selected logical drive configuration, select Acceptfrom the menu, then press. When set toLast State, the system goes into either off or on state, whatever the system statewas before the AC power loss. The motherboard is secured to the chassis by nine 9 screws as indicated by thecircles in the illustration below. To clear the supervisor password, select the Change Supervisor Password thenpress.
Lay the chassis in its side.
Asus TS300-E5 motherboard BIOS – P5BPE4L
Open the front bezel to access the hot-swap drive trays. A confirmation screen appears. No part of this manual, including the products and software described in it, may be reproduced,transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by anymeans, except documentation kept by the purchaser for backup purposes, without the express writtenpermission of ASUSTeK COMPUTER INC.
To reinstall the system fan: Select the RAID controller driver from the list, then press. We recommend that you allot at least 1U space above the server system toensure optimal thermal performance.
Page 12 xii Page 13 This chapter describes the generalfeatures of the barebone server,including sections on the front paneland rear panel specifications. Select fd0 using the key when asked to select the driver disk source.
ASUS TS300-E5/PA4 Server
Asjs of the numbers alongside eachhole when placing screws. You may also press to checkthe drive consistency. To rebuild a failed hard disk drive: Secure the server to the rack with two screws. Select an item then press to display the configuration options. The front pivoting end of the cable manager is in place as shown. Operation is subject to thefollowing two conditions: