Page 67 This chapter describes how to installoptional components into the bareboneserver. Refer to section 5. Secure the server to the rack with two screws. Even if you are not prompted to use the Setup program, you can change theconfiguration of your computer in the future. Locate the CPU socket on the motherboard.
|Date Added:||23 July 2008|
|File Size:||44.49 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
TSE5/PA4 Manual | Servers & Workstations | ASUS Global
Page Aasus 7: Using the Initialize commandTo initialize the logical drive using the Initialize command: Each wheel has a brake lock to stabilize the chassis in place. Carefully insert drive tray andpush it all the way to the depth ofthe bay until just a small fractionof the tray edge protrudes. Fasten the 2 screws on thebackplane. Lay the chassis on a flat, stable surface. Measure the depth of the rack asks the length of the rack rails. The default value indicates the maximum allowed capacity. When prompted, press to continue installation.
Page 17 of Asus Server TSE5 User Guide |
Using Asuz Configurationsection for details. If you have configured a hot spare, it will also be listed. Click the Hardware tab, then click the Device Manager button. To reinstall the power supply unit: Page Chapter 5: Make sure the data you want to mirror is on the first disk. Loosen the thumb screw thatsecures the HDD blower case tothe chassis.
Remove the 2 screws on the backplane. The Select New Array Type screen appears. ContentsThis guide contains the following parts: Page 64 To remove the power supply unit PSU: Insufficient airflow inside the system may damage the motherboard components.
Refer to the Appendix at the end of this document for thepower supply specifications. Select Virtual Drive ts300e5 the Objects sub-menu, then press. Select Yes using the key when asked if you have the driver disk.
To change the user password, follow the same steps as in setting a user password.
Open the front bezel to access the hot-swap drive trays. Align the backplane with the rail-likedents on the slot to ensure that it fitssecurely. Click on an item to install.
ASUS TS300-E5/PA4 Server
We recommend that you allot at least 1U space above the server system toensure optimal thermal performance. You need at least two identical hard disk drives when creating a RAID 1 set. Firmly hold the tray lever and pullthe drive tray out of the bay.
The bezel covers thesystem components on the front panel and serves as security. To delete a RAID set: There is a separatesub-menu for each IDE device.
Carefully lift the cover and set ts300-d5. The motherboard is secured to the chassis by nine 9 screws as indicated by thecircles in the illustration below.
Carefully remove the card from theslot.